SRX AWD V6-3.6L (2008)
Memory Positioning Module: Service and Repair
Memory Seat Control Module Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution) .
1. Remove the front seat cushion. Refer to Front Seat Cushion Replacement (See: Seats/Seat Cushion/Service and Repair/Front Seat Cushion
Replacement) .
2. Disconnect the electrical connectors from the heated seat module.
3. Remove the screws (1) retaining the memory seat module to the seat frame.
4. Remove the memory seat module.
Installation Procedure
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the memory seat module and install the memory seat module screws (1).
Tighten the screws 2 N.m (18 lb in).
2. Connect the electrical connections to the module.
3. Install the front seat cushion. Refer to Front Seat Cushion Replacement (See: Seats/Seat Cushion/Service and Repair/Front Seat Cushion
Replacement) .