SRX AWD V6-3.6L (2008)
the front track channel.
2. Prior to installing the sunshade assembly to the bottom of the sunroof frame, pull the sunshade material (1) approximately 75 mm (3 in) outward
from the assembly (2). Pull the material outward.
3. Position the sunroof/sunshade assembly to the sunroof frame.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
4. Install the sunroof/sunshade assembly screws (2).
Tighten the 6 screws to 5 N.m (44 lb in).