SRX AWD V6-3.6L (2008)
1. Position the drive and return tubes (2) to the motor block (3)
2. Use a standard pair of pliers (2) to carefully secure the return tube (1) to the motor block (3).
3. Position the motor/actuator block assembly to the motor compartment.
4. Loosely install 2 motor/actuator screws into the block in order to hold the block into position until the front track (3) rear extension (2) is installed.
5. Install either the front left or front right sunroof front window track (3). Refer to Sunroof Window Front Track Assembly Replacement (See:
Sunroof / Moonroof Track/Service and Repair/Sunroof Window Front Track Assembly Replacement) .