SRX AWD V6-3.6L (2008)
Sunroof / Moonroof Weatherstrip: Service and Repair
Sunroof Window Seal Replacement (Rear)
Sunroof Window Seal Replacement (Rear)
Removal Procedure
1. Remove the rear venting and/or stationary window panel. Refer to Sunroof Window Replacement (Front) (See: Sunroof / Moonroof Panel/Service
and Repair)Sunroof Window Replacement (Rear Vent) (See: Sunroof / Moonroof Panel/Service and Repair)Sunroof Window Replacement
(Center) (See: Sunroof / Moonroof Panel/Service and Repair)Sunroof Window Replacement (Rear Stationary) (See: Sunroof / Moonroof
Panel/Service and Repair) .
2. Pull up on the rear window seal (2). Remove the window seal from the channel.
Installation Procedure
1. Clean the silicone adhesive from the window seal groove.
2. Use a caulk gun to apply fresh silicone RTV sealant P/N 12346192 (Canadian P/N 10953476) to the new seal (2).
3. Install the seal (2) to the groove with a small roller or thumb pressure (1).
4. Install the rear window panel. Refer to Sunroof Window Replacement (Front) (See: Sunroof / Moonroof Panel/Service and Repair)Sunroof
Window Replacement (Rear Vent) (See: Sunroof / Moonroof Panel/Service and Repair)Sunroof Window Replacement (Center) (See: Sunroof /
Moonroof Panel/Service and Repair)Sunroof Window Replacement (Rear Stationary) (See: Sunroof / Moonroof Panel/Service and Repair) .