SRX AWD V6-3.6L (2008)
4. Connect the heated seat electrical connectors.
5. Install the inflatable restraint side impact module. Refer to Inflatable Restraint Side Impact Module Replacement - Front (See: Restraint
Systems/Air Bag Systems/Air Bag/Service and Repair) .
6. Install the head restraint retainers. Refer to Front Seat Head Restraint Retainer Replacement (See: Head Rest/Service and Repair/Front Seat Head
Restraint Retainer Replacement) .
7. Install the head restraint. Refer to Front Seat Head Restraint Replacement (See: Head Rest/Service and Repair/Front Seat Head Restraint
Replacement) .
8. Install the seat back trim. Refer to Front Seat Back Trim Replacement (See: Front Seat Back Trim Replacement) .
Front Seat Back Frame Replacement
Front Seat Back Frame Replacement
Removal Procedure
Caution: Refer to SIR Caution (See: Restraint Systems/Service Precautions/Technician Safety Information/SIR Caution) .
1. Remove the front bucket seat. Refer to Bucket Seat Replacement (See: Service and Repair/Removal and Replacement/Bucket Seat Replacement) .
2. Remove the seat cushion from seat. Refer to Front Seat Cushion Replacement (See: Seat Cushion/Service and Repair/Front Seat Cushion
Replacement) .
3. Remove the push-in retainer (1) from the trim covers.
4. Remove the trim covers.
5. Remove the seat back cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (See: Front Seat Back Cushion
Cover and Cushion Pad Replacement) .
6. Remove the front seat belt assembly. Refer to Front Seat Belt Replacement (See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and
Repair/Front Seat Belt Replacement) .
Important: Note the electrical wiring routing during disassembly in order to ensure proper electrical wiring routing during reassembly.
7. Disconnect and remove the remaining electrical connectors are attached to the seat back frame.