SRX AWD V6-3.6L (2008)
5. Disconnect the J-channel retainers (1).
6. Remove the seat back retaining bolts (2).
7. Remove the seat back from the seat adjuster.
Installation Procedure
1. Install the seat back on to the seat adjuster.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the seat back retaining bolts (2).
Tighten the bolts to 35 N.m (26 lb ft).
3. Connect the J-channel retainers (1).