SRX AWD V6-3.6L (2008)
Installation Procedure
1. Position the lower air inlet panel to the vehicle.
2. Install the lower air inlet panel support bracket retainer to the master cylinder mounting stud.
3. Install the lower air inlet panel fasteners.
4. Position the upper air inlet panel to the vehicle.
5. Install the upper air inlet panel fasteners.
6. Install the windshield wiper arms. Refer to Windshield Wiper Arm Replacement (See: Wiper and Washer Systems/Wiper Arm/Service and
Repair/Windshield Wiper Arm Replacement) .