SRX AWD V6-3.6L (2008)
2. Position J 38185 to the clamp in order to connect the surge tank inlet hose to the radiator.
3. Position the surge tank inlet hose to the retaining feature of the air cleaner assembly.
4. Route the surge tank inlet hose under the hood assist rod support.
5. Position the J 38185 to the clamp in order to connect the surge tank inlet hose (2) to the surge tank (1).
6. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716 -Vac N Fill Coolant Refill Tool) (See: Service and Repair
)Cooling System Draining and Filling (Static Fill) (See: Service and Repair) .
Right Hand Drive
Radiator Surge Tank Inlet Hose/Pipe Replacement (Right Hand Drive)
Removal Procedure
1. Partially drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716 -Vac N Fill Coolant Refill Tool) (See: Service and
Repair)Cooling System Draining and Filling (Static Fill) (See: Service and Repair) .
