SRX AWD V6-3.6L (2008)
1. Install the inlet heater hose to the engine cooling thermostat assembly.
2. Using J 38185 slide the clamp back into the original position on the hose.
3. Install the inlet heater hose to the heater core.
4. Using J 38185 slide the clamp back into the original position on the hose.
5. Install the cowl panel.
Notice: Refer to Fastener Notice .
6. Install the cowl panel retaining bolts.
Tighten the bolts to 6 N.m (13 lb ft).
7. Install the battery tray. Refer to Battery Tray Replacement (LHD) (See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery
Tray Replacement (LHD))Battery Tray Replacement (RHD) (See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery Tray
Replacement (RHD)) .
8. Fill the cooling system. Refer to Cooling System Draining and Filling (GE 47716 -Vac N Fill Coolant Refill Tool) (See: Service and Repair
)Cooling System Draining and Filling (Static Fill) (See: Service and Repair) .