SRX AWD V6-3.6L (2008)
Engine Mount: Service and Repair
Engine Mount Bracket Replacement - Right
Engine Mount Bracket Replacement - Right Side (w/AWD)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the right exhaust manifold. Refer to Exhaust Manifold Removal - Right Side (RWD) (See: Service and Repair/Overhaul)Exhaust
Manifold Removal - Right Side (AWD) (See: Service and Repair/Overhaul) .
3. Install a screw jack with a block of wood under the oil pan for support.
4. Remove the right engine mount upper retaining nut.
Important: Ensure not to distort or bend the engine mount heat shield.
5. Remove the right engine mount bracket mounting bolts.
6. Remove the engine mount bracket from the vehicle.
Installation Procedure