SRX AWD V6-3.6L (2008)
1. Install the engine mount to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the engine mount retaining nut.
Tighten the nut to 80 N.m (59 lb ft).
3. Install the right engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (w/RWD) (See: )Engine Mount Bracket
Replacement - Right Side (w/AWD) (See: ) .
4. Lower the vehicle.