SRX AWD V6-3.6L (2008)
Heat Shield: Service and Repair
Exhaust Manifold Heat Shield Replacement - Left Side
Exhaust Manifold Heat Shield Replacement - Left Side (LY7 - Gas, 6 Cylinder, 3.6L, SFI, V6)
Tools Required
J 42640 Steering Column Anti-Rotation Pin
Removal Procedure
Caution: Refer to Exhaust Service Caution (See: Service Precautions) .
Caution: Refer to Protective Goggles and Glove Caution (See: Service Precautions/Technician Safety Information/Protective Goggles and Glove
Warning) .
1. Install the J 42640 to the steering column. Refer to Lower Intermediate Steering Shaft Replacement (See: Steering and
Suspension/Steering/Steering Column/Service and Repair/Lower Intermediate Steering Shaft Replacement) for the tool installation instructions.
2. Remove the exhaust manifold heat shield bolts.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
4. Remove the lower exhaust manifold heat shield bolt.
5. Disconnect the center intermediate shaft from the lower intermediate shaft to provide a removal envelope for the shield. Refer to Lower
Intermediate Steering Shaft Replacement (See: Steering and Suspension/Steering/Steering Column/Service and Repair/Lower Intermediate
Steering Shaft Replacement) .
6. Remove the exhaust manifold heat shield.