SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the drain plug to the differential.
Tighten the differential drain plug to 39 N.m (29 lb ft).
2. Clean any dirt from around the differential fill plug.
3. Remove the fill plug from the differential.
Important: If equipped with a limited slip differential, limited slip differential lubricant additive, GM P/N 1052358 (Canadian P/N
992394) or equivalent must be added first. Refer to Approximate Fluid Capacities (See: Specifications/Capacity Specifications) .
4. Fill the differential with 75W90 synthetic axle lubricant , GM P/N 12378261 (Canadian P/N 10953455) or equivalent. Refer to Approximate Fluid
Capacities (See: Specifications/Capacity Specifications) .
5. Inspect the gear lubricant level to ensure it is even with the bottom of the fill plug hole to no lower than 6 mm (0.25 in) below the opening.
6. Install the fill plug to the differential.
Tighten the fill plug to 39 N.m (29 lb ft).
7. Lower the vehicle.
