SRX AWD V6-3.6L (2008)
Heater Hose: Service and Repair
Heater Inlet Hose Replacement
Heater Inlet Hose Replacement (LY7 - Gas, 6 Cylinder, 3.6L, SFI, V6)
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
1. Drain the cooling system. Refer to Cooling System Draining and Filling (GE 47716 -Vac N Fill Coolant Refill Tool) (See: Engine, Cooling and
Exhaust/Cooling System/Service and Repair)Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and Exhaust/Cooling
System/Service and Repair) .
2. Remove the battery tray. Refer to Battery Tray Replacement (LHD) (See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery
Tray Replacement (LHD))Battery Tray Replacement (RHD) (See: Starting and Charging/Battery/Battery Tray/Service and Repair/Battery Tray
Replacement (RHD)) .
3. Remove the cowl panel retaining bolts.
4. Remove the cowl panel.
5. Using J 38185 slide the clamp away from the base of the heater inlet hose.
6. Remove the inlet heater hose from the heater core.
7. Using J 38185 slide the clamp away from the base of the heater inlet hose.
8. Remove the clamp and hose from the engine cooling thermostat assembly.
Installation Procedure
