SRX AWD V6-3.6L (2008)
6. Loosen the auxiliary rear liquid line to the auxiliary front liquid line fitting (1).
7. Remove the auxiliary rear liquid line from the body retainers.
8. Remove the auxiliary rear liquid line from the vehicle.
9. Remove and discard the O-rings from the auxiliary rear liquid line.
Installation Procedure
1. Install new O-rings to the auxiliary rear liquid line . Refer to O-Ring Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C
Coupler O-ring/Service and Repair) .
2. Install the auxiliary rear liquid line to the vehicle.
3. Install the auxiliary rear liquid line to the body retainers.
4. Connect the rear auxiliary A/C line to the front auxiliary front liquid line.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the liquid line fitting (1).
