SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the power steering cooler outlet hose bracket bolts.
Tighten the bolts to 10 N.m (89 lb in).
4. Connect the power steering cooler outlet hose to the power steering cooler inlet/outlet hose assembly (with V92) or the power steering fluid cooler
(without V92).
5. Clean any excess power steering fluid from the vehicle and remove the drain pans.
6. Install the front air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) .
7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Steering and Suspension/Steering/Power Steering/Power
Steering Bleeding/Service and Repair) .