SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
1. Install the coolant temperature sensor.
Tighten the coolant temperature sensor to 22 N.m (16 lb ft).
2. Install the coolant temperature sensor electrical connector.
3. Inspect and fill the cooling system as necessary. Refer to Cooling System Draining and Filling (GE 47716 -Vac N Fill Coolant Refill Tool) (See:
Engine, Cooling and Exhaust/Cooling System/Service and Repair)Cooling System Draining and Filling (Static Fill) (See: Engine, Cooling and
Exhaust/Cooling System/Service and Repair) .