SRX AWD V6-3.6L (2008)
Knock Sensor: Service and Repair
Knock Sensor Replacement - Bank 2
Knock Sensor Replacement - Bank 2
Removal Procedure
1. Turn the ignition OFF.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
3. Remove the wiring harness heat shield from the oil level indicator tube to gain access.
4. Remove the knock sensor (KS) electrical connector.
5. Remove the KS bolt.
6. Remove the KS.
Installation Procedure