cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

07-06-04-035 > < A/T Controls - DTC P1825/P182E or P1915/MIL ON|Page 11256
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - Cold Start Rough Idle/Hesitation

TECHNICAL

Bulletin No.: 08-06-04-051

Date: November 10, 2008

Subject: 
Driveability Concerns - Rough Idle, Hesitation After Cold Start (Reprogram ECM)

Models:
2008 Cadillac CTS, SRX

Equipped with 3.6L Engine (VIN Code 7 - RPO LY7)

Condition

Some customers may comment on a rough idle, hesitation or other driveability concerns after a cold start.

Cause

Engineering has identified a concern with the ECM software.

Correction

A revised calibration has been developed to correct this condition. Technicians are to reprogram the engine control module (ECM) using SPS with the
latest software available on TIS2WEB. Refer to the Service Programming System (SPS) procedures in SI. As always make sure your Tech 2(R) is
updated with the latest software version.

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

07-06-04-035 > < A/T Controls - DTC P1825/P182E or P1915/MIL ON|Page 11256