SRX AWD V6-3.6L (2008)
7. Install the 5 remaining bolts (1) and 1 remaining bolt (2). Hand tighten only.
Notice: Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required sequencing
may result in transmission malfunction.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
8. Tighten all bolts in the sequence shown. The 2 "heat sink" bolts (17,18) must be tightened last.
Tighten bolts to 8 N.m (6 lb ft).
