SRX AWD V6-3.6L (2008)
5. Operate the vehicle within the conditions of the customer concern while monitoring fuel related parameters with a scan tool.
‹› If the scan tool parameters indicate a lean condition, test/inspect for the following:
*
Restricted fuel feed pipe
*
Restricted fuel filter
*
Restricted siphon jet pump
*
Restricted transfer lines between fuel tanks
*
Faulty fuel pressure regulator
*
Poor connections at the harness connectors and ground circuits of the fuel pump
‹› If all components test normal and the scan tool parameters indicate a lean condition, replace the fuel pump.
Repair Instructions
Perform the Diagnostic Repair Verification (See: Computers and Control Systems/Testing and Inspection/Diagnostic Trouble Code Tests and
Associated Procedures/Verification Tests and Procedures) after completing the diagnostic procedure.
*
Primary Fuel Tank Module Replacement (See: Fuel Delivery and Air Induction/Fuel Tank Unit/Service and Repair/Primary Fuel Tank Module
Replacement)
*
Fuel Injector and Fuel Rail Replacement (See: Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Fuel Injector and Fuel Rail
Replacement)