SRX AWD V6-3.6L (2008)
Control Module: Service and Repair
5L40-E/5L50-E - Automatic Transmission
Transmission Control Module Replacement
Removal Procedure
1. Unlock the transmission control module (TCM) electrical connector by pulling the retainer (2) away from the electrical connector (1).
Important: Twisting or tilting of the TCM electrical connector while disconnecting may result in bent or misaligned electrical terminal
pins.
2. Carefully disconnect the electrical connector (1) from the TCM.
3. Remove the TCM from the mounting bracket by pulling back on the retaining tabs (1) to release the control module .
Installation Procedure
1. Align the TCM with the locating pins (2) on the module mounting bracket.
2. Install the TCM by seating it fully into the bracket until all of the retaining tabs (1) have engaged the edge of the module edge.
