SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the seat belt buckle bolt (1).
Tighten the bolt to 42 N.m (31 lb ft).
3. Install the pivot cover screws (1).
Tighten the screws to 2 N.m (18 lb in).
4. Install the seat cushion. Refer to Rear Seat Cushion Replacement - Left Side (See: Body and Frame/Seats/Seat Cushion/Service and Repair/Rear
Seat Cushion Replacement - Left Side) .
5. Install the seat into the vehicle. Refer to Rear Seat Replacement (See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Replacement) .