SRX AWD V6-3.6L (2008)
3. Insert the seat belt through the body side rear upper garnish molding.
4. Install the rear seat belt upper guide bolt (1). Ensure that the seat belt webbing is not twisted.
Tighten the bolt to 70 N.m (52 lb ft).
5. Install the body side rear upper garnish molding. Refer to Body Side Rear Upper Garnish Molding Replacement (w/TB5) (See: Body and
Frame/Interior Moulding / Trim/Trim Panel/Service and Repair)Body Side Rear Upper Garnish Molding Replacement (w/o TB5) (See: Body and
Frame/Interior Moulding / Trim/Trim Panel/Service and Repair) .