SRX AWD V6-3.6L (2008)
1. Install the yaw rate sensor/lateral and longitudinal accelerometer (1) .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the 2 nuts (2) that secure the accelerometer.
Tighten the mounting nuts to 9 N.m (80 lb in).
3. Connect the electrical connector (2) to the accelerometer (1).
4. Perform the ABS diagnostic system check. Refer to Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and
Diagnostic Overview/Diagnostic System Check - Vehicle) .