SRX AWD V6-3.6L (2008)
Important: Replace the steering column support assembly if the steering column support assembly has been staked 3 times.
6. Lubricate the pivot pins with GM P/N 12346293 (Canadian P/N 992723). Install the 2 pivot pins onto the steering column support assembly. Stake
the pins in 3 places.
7. Install the tilt spring assembly only. Refer to Steering Column Tilt Spring Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Tilt Spring Replacement) .
Caution: Refer to SIR Inflator Module Coil Caution .
8. Install the turn signal switch housing. Refer to Steering Column Tilt Head Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Tilt Head Replacement) .
9. Install the steering column to the vehicle. Refer to Steering Column Replacement (See: Steering and Suspension/Steering/Steering
Column/Service and Repair/Steering Column Replacement) .
10. Enable the SIR system. Refer to SIR Disabling and Enabling (See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Air
Bag(s) Arming and Disarming/Service and Repair) .
