SRX AWD V6-3.6L (2008)
7. Install the battery positive cable (1) to the generator and install the generator output BAT terminal nut (2).
Tighten the nut to 10 N.m (89 lb in).
8. Position the positive battery cable boot at the generator output BAT terminal.
9. Lower the vehicle.
10. Install the positive battery cable (2) to the BEC stud.
11. Install the positive battery cable nut (1).
Tighten the nut to 15 N.m (11 lb ft).
12. Close the BEC terminal cover.