SRX AWD V6-3.6L (2008)
7. Disconnect the power steering gear inlet hose from the power steering pump.
8. Remove the power steering pump bracket bolts.
9. Remove the power steering pump and bracket from the vehicle.
10. Transfer the power steering pump bracket, if necessary. Refer to Power Steering Pump Bracket Replacement (LY7 - Gas, 6 Cylinder, 3.6L, SFI,
V6) (See: )Power Steering Pump Bracket Replacement (LH2 - Gas, 8 Cylinder, 4.6L, SFI, V8, DOHC, HO) (See: ) .
Installation Procedure
1. Install the power steering pump and bracket to the vehicle.