SRX AWD V6-3.6L (2008)
17. Remove the steering gear bolts.
18. Remove the rearward left side lower control arm nut and bolt.
19. Remove the steering gear through the left wheel opening.
Installation Procedure
1. Install the steering gear through the left wheel opening.
2. Install the rearward left side lower control arm nut and bolt.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Remove the steering gear bolts.
Tighten the bolts to 180 N.m (133 lb ft).
4. If equipped with AWD, lower the front differential housing.
