SRX AWD V6-3.6L (2008)
8. Remove the lower intermediate steering shaft bolt.
9. Disconnect the lower intermediate steering shaft from the steering gear.
10. Separate the rack and pinion outer tie rod ends from the steering knuckles. Refer to Rack and Pinion Outer Tie Rod End Replacement (See: Tie
Rod/Tie Rod End/Service and Repair) .
11. Remove the power steering gear inlet hose bracket bolt.
12. Disconnect the power steering gear inlet and outlet hoses from the steering gear.
13. Disconnect and plug the left front brake line from the left front brake hose.
