SRX AWD V6-3.6L (2008)
5. Remove the upper control arm to frame mounting nuts and discard.
6. Remove the upper control arm to frame mounting bolts and discard.
7. Remove the upper control arm from the vehicle.
Installation Procedure
1. Install the upper control arm to the vehicle.
Important: Loosely install all fasteners before tightening.
2. Install the upper control arm to frame mounting bolts.
3. Install the upper control arm to frame mounting nuts.
4. Install the upper control arm to the knuckle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
5. Install the upper control arm to knuckle retaining nut.