SRX AWD V6-3.6L (2008)
1. Install the knuckle and backing plate to the wheel bearing/hub.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the wheel bearing/hub mounting bolts.
Tighten the bolts to 125 N.m (92 lb ft).
3. Install the knuckle to the vehicle.
Important: Loosely install all fasteners before tightening.
4. Install the adjustment link to knuckle mounting bolt.
Tighten the adjustment link to knuckle bolt to 160 N.m (118 lb ft).
5. Install the trailing arm to knuckle mounting bolt and nut.
Tighten the trailing arm to knuckle bolt to 170 N.m (125 lb ft).