SRX AWD V6-3.6L (2008)
1. Install the stabilizer shaft link to the vehicle.
Important: Do not tighten the nuts at this time.
Important: Hold the shaft link studs with the hex tool to prevent damage to the link seal.
2. Install the stabilizer shaft link lower retaining nut.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the stabilizer shaft link upper retaining nut.
Tighten the nuts to 115 N.m (95 lb ft).
4. Lower the vehicle.