SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the wheel bearing/hub retaining bolts.
Tighten the bolts to 125 N.m (92 lb ft).
3. Install the upper control arm to the knuckle. Refer to Upper Control Arm Replacement (See: Control Arm/Service and Repair/Rear
Suspension/Upper Control Arm Replacement) .
4. Install a new wheel drive shaft retaining nut.
Tighten the nut to 160 N.m (118 lb ft).
5. Install the brake rotor. Refer to Rear Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake Rotor/Disc/Service
and Repair/Removal and Replacement/Rear Brake Rotor Replacement) .