SRX AWD V6-3.6L (2008)
Wheel Bearing: Service and Repair
Front Suspension
Front Wheel Bearing and Hub Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Vehicle Lifting/Service and Repair) .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation (See: Service and Repair) .
3. Separate the wheel drive shaft from the wheel bearing/hub assembly, if equipped.
*
If servicing the left wheel bearing/hub, refer to Front Wheel Drive Shaft Replacement - Left Side (See: Transmission and Drivetrain/Drive
Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Wheel Drive Shaft Replacement - Left) .
*
If servicing the right wheel bearing/hub, refer to Front Wheel Drive Shaft Replacement - Right Side (See: Transmission and Drivetrain/Drive
Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Front Wheel Drive Shaft Replacement - Right) .
4. Disconnect the wheel speed sensor electrical connector at the splash shield.
5. Remove the brake rotor from the vehicle. Refer to Front Brake Rotor Replacement (See: Brakes and Traction Control/Disc Brake System/Brake
Rotor/Disc/Service and Repair/Removal and Replacement/Front Brake Rotor Replacement) .