SRX AWD V6-3.6L (2008)
11. Connect the speed sensor electrical connector (2) to the control solenoid valve assembly.
12. Install the upper and lower control valve body assembly. Refer to Control Valve Lower Body and Upper Body Replacement (See: Automatic
Transmission/Transaxle/Valve Body/Service and Repair) .
13. Install the electrical connector passage sleeve. Refer to Automatic Transmission Electrical Connector Passage Sleeve Replacement (See:
Automatic Transmission/Transaxle/Seals and Gaskets/Service and Repair/6L50/6L80/6L90 - Automatic Transmission/Automatic Transmission
Electrical Connector Passage Sleeve Replacement) .