SRX AWD V6-3.6L (2008)
4. Connect the electrical wiring harness connector (1) to the 4-5 shift solenoid (2).
5. Install the transmission fluid pan. Refer to Automatic Transmission Fluid and Filter Replacement (See: Service and Repair/Removal and
Replacement) .
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
6. Reset the TAP values. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning) .
