SRX AWD V6-3.6L (2008)
Transmission Speed Sensor: Service and Repair
5L40-E/5L50-E - Automatic Transmission
Input Speed Sensor Replacement
Input Speed Sensor Replacement
Removal Procedure
1. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement (See: Service and Repair/Removal
and Replacement) .
2. Disconnect the electrical wiring harness connector (1) from the input speed sensor (2).
3. Remove the input speed sensor bolt (2).
4. Remove the input speed sensor (1).
5. Inspect the input speed sensor (1) for the following conditions:
*
Damaged or missing magnet
*
Damaged housing
*
Bent or missing electrical terminals
*
Metal contamination stuck to magnet
Installation Procedure
1. Install the input speed sensor (1).
