SRX AWD V6-3.6L (2008)
J 44827 Transmission Cooler Quick Connect
Removal Procedure
1. Remove the engine oil filter. Refer to Engine Oil and Oil Filter Replacement (See: Engine, Cooling and Exhaust/Engine/Engine
Lubrication/Engine Oil/Service and Repair) .
2. Remove the left hand (LH) intermediate shaft bearing assembly. Refer to Front Drive Axle Intermediate Shaft Bearing Assembly Replacement (
See: Differential Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Front Drive Axle Intermediate Shaft Bearing
Assembly Replacement) .
3. Using J 44827 disconnect the transmission oil cooler (TOC) lines from the radiator.
4. Remove the TOC line to transmission retaining bolt.
5. Remove the rear TOC lines from the transmission.
6. Remove and discard the O-rings.