SRX AWD V6-3.6L (2008)
6. Remove the rear TOC line to transmission retainer bolt.
7. Disconnect the rear TOC lines from the transmission.
8. Remove and discard the O-rings.
9. Remove the TOC retainer bracket bolt.
Important: Reposition the TOC lines to gain access to the retainer bracket rivets. The TOC lines must be removed individually
10. Dill out the retainer bracket rivets.
11. Remove the retainer bracket.
12. Remove the TOC lines.
Installation Procedure
1. Install the TOC lines.
2. Install the retainer bracket.
3. Install the retainer bracket to the TOC lines.
4. Rivet the retainer bracket to the TOC lines.
