SRX AWD V6-3.6L (2008)
Tighten the bolt to 25 N.m (18 lb ft).
6. Install new O-rings to the rear TOC lines.
7. Connect the rear TOC lines to the transmission.
8. Install the rear TOC line to transmission retainer bolt.
Tighten the bolt to 25 N.m (18 lb ft).
9. Connect the front TOC lines to the rear TOC lines.
10. Install the LH intermediate shaft bearing assembly. Refer to Front Drive Axle Intermediate Shaft Bearing Assembly Replacement (See:
Differential Assembly/Service and Repair/Removal and Replacement/Front Drive Axle/Front Drive Axle Intermediate Shaft Bearing Assembly
Replacement) .
11. Install the engine oil filter. Refer to Engine Oil and Oil Filter Replacement (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Engine
Oil/Service and Repair) .
