SRX AWD V6-3.6L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
Important: The transmission mount bolts must be tightened in the proper order.
2. Install by hand the transmission mount support to transfer case mounting bolts.
1. Tighten the left side bolt to 110 N.m (81 lb ft).
2. Tighten the right side bolt to 110 N.m (81 lb ft).
3. Install the transmission mount support to body mounting bolts.
Tighten the bolts to 60 N.m (44 lb ft).
