SRX AWD V6-3.6L (2008)
Transmission Mount: Service and Repair
5L40-E/5L50-E - Automatic Transmission
Transmission Rear Mount Replacement (RWD)
Transmission Rear Mount Replacement (RWD)
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair) .
2. Remove the exhaust system. Refer to Exhaust System Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair) .
3. Support the transmission with a suitable jack and a block of wood.
4. Remove the transmission support to body mounting bolts.
5. Remove the transmission to support mounting bolts.
6. Remove the transmission mount from the vehicle.
Installation Procedure
1. Install the transmission mount to the vehicle.
