SRX AWD V6-3.6L (2008)
5. Remove the transmission to support mounting bolts.
6. Remove the transmission mount from the vehicle.
Installation Procedure
1. Install the transmission mount to the vehicle.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
Important: The transmission mount bolts must be tightened in the proper order.
2. Tighten the left side transmission mount assembly bolt.
Tighten the bolts to 110 N.m (81 lb ft).
3. Tighten the right side transmission mount assembly bolt.
