SRX AWD V6-3.6L (2008)
5. Remove the internal wiring harness (2) from the transmission.
6. Remove the O-ring seals (3) from the internal wiring harness (2) only if the O-rings are cut or worn.
Installation Procedure
1. Install new O-ring seals (3) onto the internal wiring harness (2) if the O-rings were previously removed.
2. Install the internal wiring harness (2) to the transmission.
3. Install the internal wiring harness retainer (2) to the internal wiring harness (1).
4. Connect the internal wiring harness to components (1-8).