SRX AWD V6-3.6L (2008)
13. Install the propeller shaft CV joint-to-drive pinion flange bolts.
Tighten the bolts in sequence (1-6) to 60 N.m (44 lb ft).
14. Inspect the rear drive axle lubricant level. Refer to Rear Axle Lubricant Level Inspection (See: Fluid - Differential/Service and
Repair/Procedures/Rear Drive Axle) .
15. Install the exhaust system. Refer to Exhaust System Replacement (See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair) .
16. Lower the vehicle.
