cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

A/T Controls - MIL ON/DTC P2714 Set|Page 13496 > < A/T Controls - DTC P1825/P182E or P1915/MIL ON|Page 13491
Page 1
background image

Control Module: All Technical Service Bulletins
A/T Controls - MIL ON/DTC P2714 Set

Bulletin No.: 07-07-30-023

Date: September 12, 2007

TECHNICAL

Subject:
6L50 Automatic Transmission - MIL Check Engine Light On, DTC P2714 (Reprogram TCM)

Models:
2008 Cadillac CTS, SRX, STS

with 6L50 Automatic Transmission (RPO MYB)

Built Prior to the VIN Breakpoints shown.

Condition

Some customers may comment on a transmission concern where the check engine light is illuminated. Upon investigation, the technician may find DTC
P2714 in the TCM as current or in history.

Correction

A revised transmission calibration has been developed to address this issue. Reprogram the TCM with an updated software calibration. This new service
calibration is available on TIS2WEB using the Service Programming System (SPS). As always, make sure your Tech 2(R) is updated with the latest
software version.

After reprogramming the TCM, Service Fast Learn Adapts must be performed using the Tech 2(R). Check and clear all DTCs that may have set as a
result of the programming process.

Warranty Information

For vehicles repaired under warranty, use the table.

A/T Controls - MIL ON/DTC P2714 Set|Page 13496 > < A/T Controls - DTC P1825/P182E or P1915/MIL ON|Page 13491