SRX AWD V6-3.6L (2008)
Important: Replace the shaft seal only if leaking.
8. Using a small screwdriver, remove and discard the shaft seal.
Important: Replace the cup plug only if leaking.
9. Using a small screwdriver, remove and discard the cup plug.
Important: Removal of the transmission from the vehicle is NOT required for removal or replacement of the shift shaft position switch.
Remove the transmission from the vehicle and refer to Off-Vehicle Repair for replacement of the manual shift shaft ONLY if replacement
of the manual shift shaft (3) is necessary.
10. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement (See: Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement) .
11. Disconnect the electrical connector from the manual shift shaft position switch.