SRX AWD V6-3.6L (2008)
Window Shade: Service and Repair
Rear Sunshade Replacement
Removal Procedure
1. Remove the body side rear trim panel. Refer to Body Side Rear Trim Panel Replacement (w/TB5) (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair)Body Side Rear Trim Panel Replacement (w/o TB5) (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair) .
2. Remove the retaining screws (1).
3. Remove the sunshade from the trim panel.
Installation Procedure
1. Install the sunshade to the body side rear trim panel. Refer to Body Side Rear Trim Panel Replacement (w/TB5) (See: Body and Frame/Interior
Moulding / Trim/Trim Panel/Service and Repair)Body Side Rear Trim Panel Replacement (w/o TB5) (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair) .
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the screws (1).
Tighten the screws to 2 N.m (18 lb in).
3. Install the body side rear trim panel. Refer to Body Side Rear Trim Panel Replacement (w/TB5) (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair)Body Side Rear Trim Panel Replacement (w/o TB5) (See: Body and Frame/Interior Moulding / Trim/Trim
Panel/Service and Repair) .