SRX AWD V6-3.6L (2008)
2. Lubricate the washer pump intake nozzle with clean water to aid in the installation of the pump into the washer container.
3. Install the washer pump nozzle in the washer solvent container by snapping into place.
4. Ensure the washer pump is secure to the washer solvent container.
5. Connect the electrical connector to the washer pump.
6. Connect the washer hose to the washer pump.
7. Install the passenger side front wheelhouse liner.
8. Install the lower air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) .
9. Open the hood.
10. Fill the washer solvent container.
11. Close the hood.
